Infusion Pump
Application:
Continuous low flow rate infusion of fluid drug and transfusion in ICU or CCU, Continuous infusion of anesthetic, anti-cancer agent and nutrient to immature infant or newborn.s
The handy drop pump
Small Size, low weight and high-technology, incorporated into a compact design. Quick and simple mounting at the bedside, via universal clamp.
Three different modes for Infusion
- Simple Drop Rate Mode.
- Volume Target Mode.
- Time Target Mode. Customizable setup as per user's choice: 4-factory preset and 4 customized IV sets library along with facility to set default infusion set.. 5 levels for Alarm sound tone.
- 5 levels for K.V.O. flow rate.
- 5 levels for Keypad tone.
- ml/hr or Drops/min unit selection for Volume Target and Time Target mode' Facility to set default infusion mode for simplicity.
Self-testing Function
After power is turned on, the microprocessor in the TIASHI-DP automatically executes a self-diagnostic in order to ensure that all functions are working properly That also monitors every corner during infusion
Easy identification of alarm condition
Obvious and recognizable attention lights Flashing Back-light of LCD display for Audible and Visible alarm function.
Free Flow Protection
Tubing clamp (Stopper) mechanism automatically closes the IV tubing to prevent unrestricted flow of solution to the patient when the door is opened.
Keep-Vein-Open Function
When Infusion is completed, the pump automatically engages the K.V.O. function to maintain a minimum flow rate of 1 ml/h or 1 drops/min. This prevent the Infusion line from blocking due to blood clots. Communication Port: RS - 232C connector for external communication and to upgrade.
Easy Battery Replacement
The battery pack can easily be replaced simply by opening the battery cover at the back of the unit.
External DC power Compatible:
- Connects to external DC power source, enabling use of the pump within an ambulance.
- Air bubble detector (Optional).
- Air bubble detector can detect bubble size between SO to 1S0 micro litre (User settable). Alarm available for air bubble volume accumulated overtime (1 ml over 0.5h).
Improved Drop Sensor
The drop sensor controls flow rate of IV fluid, and detect irregularities in drop count. Digital signal processing for better perfomance.
Technical Specifications
Infusion
| Overall Accuracy |
+/- 1 % |
| Setting Modes |
Flow rate only, flow rate + volume target, time + volume target |
| Flow rate ranges |
0 -300 drops/min or 0 -300 ml/hr. |
| Infusion volume limits |
0 -60000 drops or 0 -10000 ml |
| Time range |
0 -99:00 hrs |
| KVO rate |
1 to 5 % of selected infusion rate but min. 1 drop/ min or 1 ml/hr |
| Pumping Mechanism |
Linear Peristaltic |
| Drop Sensor |
External |
| Air Bubble Detector** |
Ultrasonic Adjustable 20- 150µ1 15, 20, 40, 60 drops/cc. |
| Set type |
Facility to add four customized sets as per user's choice. |
Indicators
Alarms: Run & Mains. No mains, Very low battery, Low battery, Sensor error, Low flow, High flow, Door open, Near End, End of infusion, KVO, Air in line, System error.
Special Features
| Free Flow Protection |
A unique lever mechanism protects from free flow in case of accidental door opening. |
| Digital Processing of Drop Sensor Signal |
Digital processing of drop sensor signals allows you to the change the infusion parameters without the need for infusion interruption. |
Adjustable air in line alarm threshold
|
The size of air bubble to be detected can be set in the range of 20 to 150µ1 |
| Flow Rate & Volume Unit selection |
Option to select Flow Rate Unit in terms of drop/mill or ml/hr & Volume Unit in terms of drops or m1. |
| External power supply |
AC Input range170 -270 VAC, Frequency 50 -60 Hz
12 Volts, l Amp DC output Supply |
| Power Consumption |
12 Watts max. |
| Build in battery |
8.4 V, 2.1 AHr Ni -MH battery for increased durability.
Continuous operation for about 4.5 hrs. at an operating rate of 20 drops/mill or 20 ml/hr with assign I. V. Set under standard conditions. |
| Classification |
Class II, IPX1 (Drip Proof) |
| Operating Conditions |
Ambient Temperature 05 to 40o C Relative Humidity 20 to 90 % (no condensation) Atmospheric 70 to 106 kPa pressure |
| Housing & construction |
Compact and Robust A.B.S Plastic
| Weight |
Approx. 2.4 Kgs. |
| Dimensions |
Approx. 250 (L), 245 (H), 90 (W) |
| Mounting |
On a pole or bed-fra |
Medicaid having a policy of continuous product improvement reserves the right to alter specification/physical design without prior notice .
|
